We have introduced a new Jump-N-Carry model, Model No. JNC325, 12 Volt Lithium Jump Starter, which will be available starting this week. The JNC325 is an ideal shop tool, combining robust jump starting power with numerous features that deliver utility, convenience and safety, including UL2743 safety certification, USB outlets to power small electronics, 12 Volt power supply capability and a high intensity LED work light.

Delivering 450 Start Assist Amps of starting power, the JNC325 can tackle a wide variety of starting tasks in numerous application environments, including automotive, marine, light truck, agricultural and fleet starting. It can start most V8 engines up to 8L gas engines and 6L diesel engines. It also features the ability to jump start totally dead (0.0V) batteries – simply confirm that you have made a proper connection and press and hold the override button to force the unit on. It’s that easy.

 

The JNC325 incorporates numerous features to make jump starting safer for the operator and vehicle being serviced, including reverse polarity protection, backfeed protection, over-voltage protection, short circuit protection and overheat protection. It features safety certification by SGS laboratories to comply with the UL2743 lithium jump starter safety regulation.

 

The JNC325 features two USB outlets to power small electronics. Also included is a 12 Volt Female Adapter, allowing the JNC325 to power accessories from its 10A DC output or be used as a memory saver when changing out a vehicle battery. It features a high intensity LED work light for use in nighttime starting or other emergency situations. Charging is fast and easy with the included QC3.0 AC charger and its automatic charging routine. The unit comes packaged in a convenient case for easy transport and storage.

For more information, click here.

17 thoughts on “New Lithium Jump Starter from JNC”

    1. Richard – Thanks for your question. The JNC325 will start making its way into resale outlets in the next few weeks. We do not control the final price, that is determined by our resellers. We sell through a wide variety of outlets, including independent auto parts stores, professionally-focused auto parts chains, mobile tool dealers and more. Thanks, Jim from Clore Automotive

    1. John – Thanks for your comment. The JNC325 will start making its way into resale outlets in the next few weeks. We sell through a wide variety of outlets, including independent auto parts stores, professionally-focused auto parts chains, mobile tool dealers and more. Thanks, Jim from Clore Automotive

    1. Toby – Thanks for your comment. Because we sell though distributors, we do not control the final price. It will likely be in the $189-$219 range. Thanks again, Jim from Clore Automotive

  1. Hello Clore,

    When will your new lithium jump starter, the JNC325, be available. What is it’s price?

    Thank you,
    Don Quest

    1. Don – Thanks for your question. It will start making its way into resale outlets in the next few weeks. We do not control the final price, that is determined by our resellers. It will likely be in the $189-$219 range. Thanks, Jim from Clore Automotive

    1. Robert – Thanks for your question. Because we sell through distribution, we do not set the final prices at the street. That said, this item typically can be found for $49-$69 from the many outlets that carry it. Thanks, Jim from Clore Automotive

    1. Glenn – Thanks for your request. The JNC325 has 10% more battery capacity, but due to the configuration and the high output of its batteries, it delivers about 35% greater starting power (start assist amps). Also, it is a 4-cell design (vs a 3-cell design in the JNC318). This means that it starts with a higher resting voltage, so when the unit’s voltage is pulled down by the start attempt, is is not pulled as deep, again adding to the starting capacity of the JNC325. Thanks to the greater starting power of the JNC325, we have eliminated the preheat mode, as the JNC325 has enough capacity to start in cold temperatures without it. The JNC325 has longer cable reach (24″) and heavier gauge (#6AWG) cables than the JNC318. Finally, the JNC325 has full UL2743 safety certification, whereas only the cells of the the JNC318 (and the charger) had UL safety certification. I hope this helps. Jim from Clore Automotive

  2. Does Clore plan to phase out their lead acid line of jumper devices with lithium jumpers like the JNC 325? My jump starters are approaching the 7-8 year mark and may soon need replacement. Should I consider a battery replacement for my starter or plan on one of the lithium jumpers?

    1. Melvyn – Thanks for your question. No, we have no intention of slowing down on our lead acid solutions. But, we have decided to update our lithium jump starter offering. There is no need to rush if your current models are working fine. We’ll be here when you need us. Thanks, Jim from Clore Automotive

    1. Bobby – Thanks for your question. We do not plan to offer a trade in program on previous lithium models. The shipping requirements related to lithium would make such a program very difficult to execute. Thank you, Jim O’Hara

Leave a Reply

Your email address will not be published. Required fields are marked *