With the BA327 and BA427 Digital Battery and System Testers from SOLAR, it is easy to overcome damaged cable ends. Both models feature an ATV connector that makes the cable end replaceable. Simply order this BAA3 cable end set to continue to use your tester even after the cables or clamps are damaged or wear out.
Effective battery analysis made easy. That perfectly describes the BA327 Digital Battery and System Tester with Printer from Clore Automotive. This handheld unit offers a complete testing solution for 6 Volt and 12 Volt batteries and 12 Volt and 24 Volt charging systems. With an operating range down to 1.5V, it can even accurately test discharged batteries and features a testing capacity from 40 to 2000 CCA.
This unit is versatile, accurate and convenient. Compatible with a wide variety of battery types, the BA327 is designed to test flooded, AGM flat plate, spiral wound, gel cell, start-stop AGM and enhanced flooded batteries. This tester can test battery sizes from powersport to group 31 batteries.
This unit is a cinch to use. Simply choose the battery type, identify the rating system for testing and input the battery rating. The tester then runs through the testing process, which includes temperature compensation, and provides the results, including the determined value of the battery being tested. The backlit display makes test results easy to read even in low-light conditions or bright light.
After the battery test is complete, the operator can conduct a starting system test and an alternator output test to provide a complete service solution. The integrated printer provides quick and easy service documentation. Shop contact information can be included on printouts.
Its extra-long 10’ cable leads provide flexibility and make it easy to access even hard-to-reach areas. The cable ends are field replaceable, meaning you can make repairs and extend the life of this product quickly and easily. This tester includes (6) AA batteries, a roll of printer paper, side post adapters and a manual in a convenient storage case.
The BA427 offers a complete testing solution for 6 and 12 Volt batteries and 12 and 24 Volt charging systems. With an operating range down to 1.5V, it can even test discharged batteries and features a testing capacity to 3000 CCA. Compatible with a wide variety of battery types, the BA427 is designed to test flooded, AGM flat plate, spiral wound, gel cell, start-stop AGM and enhanced flooded batteries. It features 10’ cable leads, replaceable cable ends, temperature compensation and a convenient storage case. Compared to the BA327, it expands the testing range in several ways: 1.) it tests batteries to 3000 CCA (vs 2000), 2.) it allows for the attachment of a volt probe or amp clamp to expand the diagnostic capabilities of the tester, and 3.) it features a USB port to connect to a PC equipped with our battery management software for ongoing tracking of test results.
Subscribe to our monthly e-newsletter to discover more about Clore products, customer real life stories and informative articles.
